quarter turn fasteners, aircraft, engine cowlings, racing fasteners, quick release, quick access

|  HOME  |  PRODUCTS  |  SHOPPING CART  |  CONTACT  |  E-MAIL  |  INSTRUCTIONS  |  PRICING  |

GENERAL  PURPOSE  C-LOCK  FASTENERS

2600 / 2700 Series

FAA  Approved for Aircraft Use Under  TSO-C-148A

Click for Larger Image: 26S51 series camloc aircraft and racing cowling fastener systems in stainless.
Click for Larger Image

 2600 Wing Head Stud
Click for Larger Image

 Click for Larger Image: 2700 series camlock aircraft fasteners in stainless for aviation cowlings.
Click for Larger Image

Click for Larger Image: MS213 mil-spec adjustable camlock receptacle for aircraft and racing fasteners.
Click for Larger Image

 Click for Larger Image: MS-T98 Fastener Installation Tool
Click for Larger Image

The MilSpec 2600/2700 Series C-Lock Fasteners

 ...are perfect for light to medium duty applications. They are small enough to fit in limited mounting space and are light weight. 2600 series are Low Profile. 2700 series are Countersunk, Flush. These fasteners have a 200# working strength and a 300# ultimate tensile load capacity. Unlike the heavy duty 4000 series C-Locks, these do not use a grommet in the outer panel. The studs are retained in the panel with simple snap rings. Stud lengths vary by .030" and are indicated by a number stamped in the head. Most common stud lengths are in stock in stainless. Please specify slotted or Phillips head when ordering. Use the MS-T98 tool for installing the stud retainers quickly and easily, it can be found on our Tools Page.

 Click on desired Part Number below to add the item to your shopping cart
(quantity can be adjusted after adding item to cart).

 

2600 Series Stud Assy
C-Lock  2600 Series Studs
 


Total Material    
Thickness (Grip)   		 Slotted Head        Phillips Head

 Stud Length
 (Tol: ± .010")
Steel   Stainless Steel   Stainless
.030 - .059 2600-1   2600-1S     26S8-1   26S51-1  

0.760

.060 - .089

2600-2   2600-2S     26S8-2   26S51-2  

0.790

.090 - .119

 2600-3   2600-3S     26S8-3   26S51-3  

0.820

.120 - .149

 2600-4   2600-4S     26S8-4   26S51-4  

0.850

.150 - .179

 2600-5   2600-5S     26S8-5   26S51-5  

0.880

.180 - .209

 2600-6   2600-6S     26S8-6   26S51-6  

0.910

.210 - .239

 2600-7   2600-7S     26S8-7   26S51-7  

0.940

.240 - .269

 2600-8   2600-8S     26S8-8   26S51-8  

0.970

.270 - .299

 2600-9   2600-9S     26S8-9   26S51-9  

1.000

.300 - .329

 2600-10 2600-10S   26S8-10 26S51-10

1.030

.330 - .359

 2600-11 2600-11S   26S8-11 26S51-11

1.060

.360 - .389

 2600-12 2600-12S   26S8-12 26S51-12

1.090

.390 - .419

 2600-13 2600-13S   26S8-13 26S51-13

1.120

.420 - .449

 2600-14 2600-14S   26S8-14 26S51-14

1.150
.450 - .479 2600-15 2600-15S   26S8-15 26S51-15 1.180
.480 - .509 2600-16 2600-16S   26S8-16 26S51-16 1.210
.510 - .539 2600-17 2600-17S   26S8-17 26S51-17 1.240
.540 - .569 2600-18 2600-18S   26S8-18 26S51-18 1.270
.570 - .599 2600-19 2600-19S   26S8-19 26S51-19 1.290
.600 - .629 2600-20 2600-20S   26S8-20 26S51-20 1.320

Top of Page

 


2600 Series Wing Head Stud
C-Lock  2600 Series Studs (Wing Head)
 

Total Material
Thickness (Grip)

 Wing Head Studs

Stud Length
(Tol: ± .010")
Steel   Stainless  
.030 - .059 2600-1W   2600-1SW  

0.760

.060 - .089

 2600-2W   2600-2SW  

0.790

.090 - .119

 2600-3W   2600-3SW  

0.820

.120 - .149

 2600-4W   2600-4SW  

0.850

.150 - .179

 2600-5W   2600-5SW  

0.880

.180 - .209

 2600-6W   2600-6SW  

0.910

.210 - .239

 2600-7W   2600-7SW  

0.940

.240 - .269

 2600-8W   2600-8SW  

0.970

.270 - .299

 2600-9W   2600-9SW  

1.000

.300 - .329

 2600-10W 2600-10SW

1.030

.330 - .359

 2600-11W 2600-11SW

1.060

.360 - .389

 2600-12W 2600-12SW

1.090

.390 - .419

 2600-13W 2600-13SW

1.120

.420 - .449

 2600-14W 2600-14SW

1.150
.450 - .479 2600-15W 2600-15SW 1.180
.480 - .509 2600-16W 2600-16SW 1.210
.510 - .539 2600-17W 2600-17SW 1.240
.540 - .569 2600-18W 2600-18SW 1.270
.570 - .599 2600-19W 2600-19SW 1.290
.600 - .629 2600-20W 2600-20SW 1.320

Top of Page

 

2700 Series Stud Assy
C-Lock  2700 Series Studs
 


Total Material     Thickness (Grip)   		Slotted Head           Phillips Head

 Stud Length
 (Tol: ± .010")
Steel   Stainless Steel   Stainless
.030 - .059 2700-1   2700-1S     27S3-1   27S3-1S  

0.610

.060 - .089

 2700-2   2700-2S     27S3-2   27S3-2S  

0.640

.090 - .119

 2700-3   2700-3S     27S3-3   27S3-3S  

0.670

.120 - .149

 2700-4   2700-4S     27S3-4   27S3-4S  

0.700

.150 - .179

 2700-5   2700-5S     27S3-5   27S3-5S  

0.730

.180 - .209

 2700-6   2700-6S     27S3-6   27S3-6S  

0.760

.210 - .239

 2700-7   2700-7S     27S3-7   27S3-7S  

0.790

.240 - .269

 2700-8   2700-8S     27S3-8   27S3-8S  

0.820

.270 - .299

 2700-9   2700-9S     27S3-9   27S3-9S  

0.850

.300 - .329

 2700-10 2700-10S   27S3-10 27S3-10S

0.880

.330 - .359

 2700-11 2700-11S   27S3-11 27S3-11S

0.910

.360 - .389

 2700-12 2700-12S   27S3-12 27S3-12S

0.940

.390 - .419

 2700-13 2700-13S   27S3-13 27S3-13S

0.970

.420 - .449

 2700-14 2700-14S   27S3-14 27S3-14S

1.000
.450 - .479 2700-15 2700-15S   27S3-15 27S3-15S 1.030
.480 - .509 2700-16 2700-16S   27S3-16 27S3-16S 1.060
.510 - .539 2700-17 2700-17S   27S3-17 27S3-17S 1.090
.540 - .569 2700-18 2700-18S   27S3-18 27S3-18S 1.120
.570 - .599 2700-19 2700-19S   27S3-19 27S3-19S 1.150
.600 - .629 2700-20 2700-20S   27S3-20 27S3-20S 1.180

Top of Page

 

The MS213 Adjustable Depth Receptacle Makes 2600 & 2700 Series C-Lock Fasteners More Versatile and Easier to Install Than Ever Before!

MS213 mil-spec adjustable camlock receptacle for aircraft and racing fasteners.
Click for Larger Image

MS213
(Exploded View)

 

  • Any one stud length fits a wide range of panels

  • The MS213 is an exact replacement for 212-12 receptacles

  • Lighter than 212 fixed depth receptacles with no sacrifice in strength ratings.

  • Economical. Simply inventory one stud length for all applications.

  • Fully compatible with existing C-Lock designs.

  • FAA approved for aircraft use under TSO-C-148.

  • Click Here for Installation instructions and more information!